Detailed Product Description

AN-TP-1 Ground Loop Isolator with Two Screw Terminals for UTP cable and Male BNC with extend 175mm pigtail

Along with the development of the CCTV, it's more and more necessary toutilize a kind of high-quality and low-priced video transferringmethod. The traditional coaxial cable and fibre-optical transferringmethods can only solve the short and long-distance video transferringproblems, however, the picture signal transferring for a distancearound 1000 meters becomes the bottle-neck of the monitoring field. Aseries of twisted-pair video transferring equipment researched anddeveloped by AD-net Technology Co. Ltd. use one of the fournon-sheltering Cable 5 or above twisted-pairs to transfer the basicband video signal with high-quality, and can realize the transferringof one or more high-quality video signal or control signal in the samecable. What's more, the signals will not interfere with each other withthe nominal transferring distance between 0~1500 meters. This kind oftwisted-pair video transferring equipment has super stronganti-interference ability, which makes it the best choice in suchstrong-interfering environments as the lift, concrete plant, steelplant and electric plant etc.

This kind of transferring methodhas lots of advantages such as convenient wiring, simple installation,high reliability, strong anti-interference ability, good transferringeffects and low system cost etc. Its utilization has brought greatchanges to the traditional wiring methods in all kinds of monitoringplaces as the intelligent building and residential districts. Itprovides a high performance/price ratio solution to the monitoringengineering system design

FEATURES

• Transmission range: color signal 225m(750 feet) working withAD-net Passive Receivers, and 800m(2624 feet) with AD-net ActiveReceivers;
  
• Built-in unique video iso-typetransformer and passive isolation circuit, connects two equipments viamagnetic circuit, effectively cut ground-loop circuit current;
  
• Built-in transient protection;
  
• Directly connected to output terminal of camera.

• Better interference rejection than coax

SPECIFICATIONS

Video
Frequency	DC20Hz-10Hz+0/-3dB
Attenuation	Maximum 1.5dB
Common mode/Differential-mode Rejection	15KHz-5MHz Typical 60dB
Resistance BNC Coax	75ohm
Connector UTP Cable	100ohm
Cable Type:
Specification	24AWG or Thicker Cat-3 above
Resistance	100ohm±20
DC Loop Resistance	18ohm/100m
Differential Capacitor	62pf/m
Ground Loop Circuit Isolation	>90dB >50Hz
Environment:
Temperature	Operating: -20° to 75° C
Humidity	0~95%
Anti-transient Ability	6000V 1.2μS×50μS
Weight	48g(1.693oz)
Dimensions	Length 52mm(2.047in) * Width 18mm(0.709in) * Height 30mm(1.181in)