Detailed Product Description

AN-FM-480/ETH is state-of-art 16 x E1 G.703 + Ethernet 10/100BaseT fiber multiplexer which allows effetive transmission of those protocols over fiber optical cable over distances more than 120 km. Single mode, dual mode and WDM (BiDi) versions available.

The AN-FM-480/ETH is a fiber media transport for8E1 + 1 10/100BaseT  transmission. The BNC model provides unbalanced 75Ohm coaxial connections while the RJ-45 model provides balanced 120 Ohmconnections over twisted pair wiring.
All media converters areavailable with either multi-mode or single-mode optical tranceivers andwith connectors for SC, ST, or FC. In single mode they are available inup to 120 km versions reach, which will provide the ability to transmitand receive data using only a single optical fiber pair.

When the AN-FM-480/ETH is linked to the AN-CH03 with AN-FM-480/ETH card,it allows network engineers to get greater functionality throughadvanced SNMP features, the network administrator can manage anyconverter module from anywhere on the network, detect any link loss andmaintain each loop.

FEATURES

• Can provide up to 16 E1 channels transmission transparently and 1 10/100M Ethernet data channel.
  
• Provide 1 Ethernet interface (support VLAN, flow control, and self- negotiation, full/semi duplex, 10M/100M optional)
  
• Local device monitor remote device (2 row LEDs, upper indicate local status,lower indicate remote status)
  
• Provide function of 16 E1 remote loop, fiber local loop, and 1 interface of phone.
  
• Power supply option: AC220V, DC-48V, DC+24V (optional).
  
• Transmission distance: 2-120 Km
  
• Two fiber two direction and single fiber two direction (optional).
  
• Match telecom operation requirement, MTBF above 70,000 hours.
  
• High reliability, provide install type of 19 inch rack, desktop, hanging, and card, rack support both DC and AC power supply.
  
• Provide SNMP function.

SPECIFICATIONS

E1 interface parameter:
Channel capacity: 16 Channels
Bit Rate: 2.048 Mb/s ±50 ppm
Line Code: HDB3
Line Impedance: 120 Ohm / 75 Ohm
Connector: RJ-45 or BNC
Pulse Shape: ITU-T G.703
Jitter Performance: ITU-T G.823

Ethernet interface:
Interface Rate: 10/100Mbps
Interface character: match IEEE802.3, IEEE802.1 Q
Connector: RJ45

Optical interface parameter:
Optical wavelength: 850/1310nm for multi-mode fiber, 1310/1550nm for single-mode fiber
Optical interface: SC/FC/ST (Optional)
Transceiver module: > -6dBm
Optical receiver sensitivity: <-36(BER<10)
Receive range: >-30dB
Transmission distance: multi-mode 2 Km, single-mode 20/ 40 / 80 / 120 Km, WDM versions for any distance available

Power:

DC: -48V (-36 to -72V); +24 V (Optional)
AC:  90 to 260 VAC ; 47 ~ 63Hz
Power Interface: DC power terminal/AC socket
Power Consumption: 10 W maximum

Working environment:
Operating temperature: 0 to 50°C
Storage temperature: -20  to +70°C
Relative humidity: 5% to 90% (25°C no condense)