GSHDSL Modem E1 / Ethernet / V. 35

AN-GDHDSL-E1, Ethernet & V.35 modems uses G.SHDSL technology, complying with the ITU and ETSI standards, to extend the range of digital G.703 interfaces, V.35 interfaces and Ethernet.

AN-GSHDSL-E1/ETH/V.35 modems use TC PAM-16 line coding, equalization, adaptive filtering and echo cancellation to compensate for line impairments, bridge taps and mixed cabling. This provides immunity to background noise and enables transmission of multiple SHDSL lines on the same physical cable. AN-GSHDSL-E1/ETH/V35 can be managed via A VT-100 compatible Asynchronous Terminal Interface. 
AN-GSHDSL-E1/ETH/V.35 is equipped with an adaptive auto rate capability that identifies the maximum line rate supported by the copper loop.  
 
Extends the range of 2Mbps data transmission up to 4Km
Supports both E1 G.703 modes - framed E1 (fractional) and unframed
Supports all industry standards, and made especially to work with other third party vendors TDM equipment, what supports G.SHDSL standard
Monitoring, control and diagnostics of local and remote units are made by Network Management System
Perfomance monitoring available on console management
Robust, error free transmission algorithm used
Remote and local loopbacks for testing purposes
Industries probably most effiecient TC PAM-16 line coding for effective twisted pair usage and high distances

Stadard: ITU_T G.991.2 G.994.1
Line: 2-Line
Data Rate: 64K - 2048Kbps
Line Coding: TC 16-PAM
Approximate range: 4Km (test in 0.4 mm, 
2-wire)
Connector: RJ11